GSM-VideoAlarmC is suitable for

guarding and protecting of estate manufacturing and storage spaces traffic service farming

environmental protection peace observation tourism promotion area

WHAT IS GSM-VIDEOALARMC

In the area of safeguarding and control engineering various sophisticated sensors are used to ensure surveillance over monitored spaces or technology equipment.

However, in many cases the best and most comprehensive information can be gain through a simple view of the spaces monitored.

By means of the GSM network GSM-VideoAlarmC transfers the color image scanned by a camera in protected area to the screen of computer monitor or mobile phone.

Further it sends an SMS notice on the mobile phone that an image or information about conditions of digital inputs were dispatched.

WHAT GSM-VIDEOALARMC CAN DO

• Protect area, raise alarm and send an SMS notice containing information about raised alarm
• Notify of alarm and transmit picture on the display of computer or telephone via HTTP protocol
• Notify of alarm and transmit picture on the display of computer or telephone via e-mail
• Operate as WEB camera
• Notify of GSM-VideoAlarmC status via SMS
• Control output circuits to control other devices (heating, pumps, lighting,... etc.) via SMS
• Notify of input circuits status via SMS (thermometers, sensors, ... etc.)
• Scan and dispatch an image after an SMS command
• Scan and dispatch an image according to a plan in a fixed moment
• Scan and dispatch an image after a command from a sensor or from an electronic alarm system
• Scan and dispatch a series of consecutive images
• Movement detection in pictures scanned by camera No.1

VARIANTS OF INPUT/OUTPUT CITCUITS

GSM-VideoAlarmC system is equipped with:

• one or four video inputs 75 Ohm
• four digital inputs (connection of safety appliance, sensors of temperature, level, movement, etc.)
• three digital outputs (control of heating, pumps, barriers, etc.)

Power supply

GSM-VideoAlarmC is fed with d.c. voltage 15V from a network adapter. After customer wishes GSM-VideoAlarmC can be fed with voltage 8 - 24V and power supply can be backed up by means of an accumulator battery.

BASIC TECHNICAL PARAMETERS
Power supply	DC	15V
	Idle power consumption	Approx. 2W
	Power consumption	Approx. 5W
Camera	Monochrome	CCIR
	Color	PAL
	Resolution	240 lines or better
	Video input	1Vp-p, 75 Ohm
Picture transmission	Picture	Color or Black-white
	Picture format	JPEG, 5 levels of compression
	Resolution	640x512, 320x256 or 160x128 pixels
	Transmission mode	GPRS, GSM-DATA
	Transmission time of one picture	5s - 20s
Digital inputs/outputs	4 x digital input	0V - 12V
	2 x output - open-drain	Max 24V / 200mA
	1 x output - contact relay	Max. 60V / 500mA
Configuration	Through RS 232	Full configuration
	Through GSM network	Full configuration
GSM module	Dual band 900/1800MHz
Mechanical design	Indoor installation	Al box 200x110x50mm
	Standard operating conditions:	Surrounding temperature -5°C to +50°C Humidity max. 90%, non-condensing